What are the links of carton machinery maintenance
Talking about the key points of carton mechanical maintenance and repair are as follows:
Disassemble and wash all rolling bearings, and add new grease, calcium-sodium-based grease can be used.
Remove all the dirt on the conflict surface, especially clean the chain and sprocket, and refill the lubricating oil.
Check whether the stove is leaking smoke. If there is smoke leakage, check the drum smoke block, stove and chimney, etc. If any damage is found, it should be corrected and replaced in time. The electric heating model should check whether the electric heating tube is damaged, and the damaged (second-hand carton machinery) should be replaced.
Replacing the lubricating oil in the worm gear reducer of the carton machinery, the lubricating oil can be selected from No. 10, No. 20 or No. 30 oil.
After the parts are corrected, the whole machine is assembled, and the machine is turned on to investigate whether the machine is working normally. Properly heat the drum, and put in a small amount of special oil for carton packaging machinery to melt and cover the inner and outer surfaces of the cylinder, and then cut off all power.